PADS4 Viewer on Qbic BXP-100

Before you start

The BXP-100 are supported:

• BXP-100 (Android 10)
• BXP-100 (Android 12)

Minimum PADS4 Server Version

During installation, you'll need to configure the location of your PADS4 Server. For a smoother setup, we recommend installing the PADS4 Server before configuring your Qbic player.

The Qbic BXP-100 requires a minimum PADS4 Server version of PADS4 2023.1. Make sure your PADS4 Server meets this requirement before proceeding.

Minimum Firmware version 

The BXP-100 player you're installing PADS4 on must be running firmware 1.0.4 (Android 10) or 2.12 (Android 12) or later.

Bulk Deployment of Qbic devices

For detailed instructions on deploying PADS4 Viewer to multiple Qbic devices simultaneously, refer to our guide on Bulk Deployment of PADS4 Viewer for Qbic Devices

When PADS4 is succesfully installed continue to Configuring the BXP-100

Configuring the BXP-100

Installing PADS4 Viewer via USB Stick

This method allows you to install the PADS4 Viewer application on your Qbic device using a USB flash drive.

Downloading the PADS4Qbic.apk:

1. Access the PADS4 Apps: Open a web browser on your computer and navigate to the following URL, replacing [YourPADS4Server] with the actual address of your PADS4 Server:

   https://[YourPADS4Server]/PADS4/apps
   

2. Download the Application: Locate the file named "PADS4Qbic.apk" and download it to your computer.

Alternatively:

• You can also download the latest version of the application from the PADS4 App server [here]. 

Transferring the File to the Qbic Device:

1. Copy the APK File: Copy the downloaded "PADS4Qbic.apk" file to a USB flash drive.

2. Connect the USB Drive: Insert the USB flash drive into a USB port on your Qbic BXP-100 device.

Preparing the Qbic Device:

1. Power on the Device: Ensure your Qbic device is powered on.

2. Enabling Native Android Mode:

   • On the Qbic startup screen, navigate to the "Settings" menu.
   • Within Settings, select "Player settings".
   • Under the "Android System" section, locate the option for "Switch to native Android mode" and enable it.

3. Exiting Settings: Close the Settings application. You should now see the standard Android home screen.

Installing the PADS4 Viewer App

1. Access the Files Application: On your Qbic device in native Android mode, locate and open the "Files" application (or a similar file manager app).

2. Locate the PADS4Qbic.apk:

   • In the Files application, browse to the storage location for your USB flash drive. It might be labeled "USB storage" or similar.
   • Once you've located the USB storage, navigate to the folder where you copied the "PADS4Qbic.apk" file.

3. Initiate the Installation:

   • Tap on the "PADS4Qbic.apk" file to begin the installation process.

4. Handle Unknown App Warning (Optional):

   • You might encounter a security warning informing you that you're installing an application from an unknown source. This is a normal notification for sideloaded apps.
   • If you see this warning, tap "Continue" to proceed with the installation. You trust the source (the PADS4 Apps Portal) and the PADS4 Viewer application.

5. Confirm Installation:

   • A confirmation window will appear detailing the app permissions. Review the permissions if desired, then tap "INSTALL" to confirm the installation.

6. Complete Installation:

   • Once the installation is complete, you'll see a "DONE" button. Tap "DONE" to exit the installer. 

7. Disabling Native Android Mode:

   • Within Settings, select "Player settings".
   • Under the "Android System" section, locate the option for "Switch to native Android mode" and disnable it.

8. Exiting Settings: Close the Settings application. You should now see the Qbic Configuration screen.

Configuring the BXP-100

This section guides you through configuring your Qbic device to automatically launch the PADS4 Viewer application upon startup, regardless of whether you installed it using a USB flash drive or bulk deployment.

Content URL Setting (Applicable to USB Installation Only):

• If you installed PADS4 Viewer via USB: You might have already set the content URL during installation. If not, locate the field for "Content URL". Enter com.pads4.viewer.qbic/.MainActivity" in this field.

Accessing Settings (Method-Specific):

• USB Installation: Navigate to the "Settings" menu on your Qbic device.
• Bulk Deployment: Within the PADS4 Viewer app itself, click on "Systems Settings".

Configuring Browser View and Screen Settings (Both Methods):

1. Once you've accessed Settings locate the section "Player settings".

2. Within this section, adjust the following settings:

   • Browser View:
     • Request Desktop site: On
     • Show security warnings: Off
     • Block Pop-ups: On
     • Keep cookies: Off
   • Screen:
     • Full screen: On
     • Adjust window for a shown input method: On

Exiting Settings (Both Methods):

• Close the Settings application. You should return to the Qbic home screen.
• The PADS4 Viewer will start after 20 seconds. 

Connecting to the PADS4 Server

1. Specify Server Location: Within the PADS4 Viewer app, locate the designated field for the server address. Enter the full URL of your PADS4 Server, replacing [YourPADS4Server] with the actual address. For example:

   https://[YourPADS4Server]/PADS4/
   

2. Optional: Set Viewer Name: You can optionally specify a name for your device in the PADS4 Viewer app. If left blank, the PADS4 server will automatically generate a name.

3. Initiate Connection: Click the "Start" button in the PADS4 Viewer app to establish the connection with your PADS4 Server.

4. Grant Permissions (if prompted): During connection setup, the PADS4 Viewer may request certain permissions. Grant these permissions by clicking "Allow" or "While using the app" as necessary.

5. PADS4 Splash Screen: You'll shortly see the PADS4 splash screen appear.

Congratulations! You've successfully installed the PADS4 Viewer application.